Device Configuration

1.The main components are manufactured by advanced CNC machining.

2. All the frames are machined by gantry milling.

3. The frame is made of manganese steel processed as a whole, with a reasonable overall structure that can withstand a pressure of 500T.

4. The heating system adopts thermal oil circulation heating, and the machine is equipped with bottom heating, which can achieve more ideal results to a limited extent.

5. The worktable adopts advanced acceleration start and deceleration stop motion methods, effectively preventing workpiece movement during worktable movement.

6. The control system adopts Delta PLC control, with human-machine operation page, high degree of automation, and multiple working modes to adapt to the processing of different workpieces.

7. This machine is mainly powered by oil pressure and compressed air.

8. The control system adopts computer remote control, human-machine operation page, high degree of automation, and multiple working modes to adapt to the processing of different workpieces.

9.When laminating, heating up and down increases the activation temperature of the adhesive, improves the edge quality of the workpiece, and slows down the cooling temperature of the silicone sheet.

10. By using high-temperature thermal oil for internal heating and circulation, the temperature uniformity is greatly improved, the thermal efficiency is high, the service life of the heating tube is extended by 5-10 years, and the surface quality of the workpiece coating is further improved.

11. Quality assurance, one-year warranty, and technical support and professional training provided at any time.

Detail Display

Demo Video